Materials

To complete our product range, STACEM is associated with Saint Gobain to distribute the performance foams below :

KOREL® Micro-Cellular Polyurethane Foam (Materials for large quantities)
- K20 : Very soft foam
- K20 : Very soft and thin gauge foam
- K30 : Soft foam
- K40 : Medium density
- K50 : Firm foam
- K60 : Very firm foam


ProtectION ® Micro-Cellular Polyurethane Foam
- PF45 : High resiliency foam + flame retardant foam
- PF47 : Soft and low pressure foam + flame retardant foam


NORSEAL® Bio-based PUR Foam
- AGP200 : Bio-based foam, ultra soft, low fogging and VOC emissions. Rating FMVSS302


NORSEAL® Intumescent Foam
- FS1000 : Fire Stopping Intumescent Foam






COHRlastic® modified cell silicone foam rubber
- F-12 : Soft foam, UL94V0 and FDA
- F-20 : Medium density foam, UL94VO


COHRlastic® closed cell expanded silicone sponge rubber
- R10470 : general purpose fits most applications, medium and firm grades
- R10480 : low compression set resistance formula, soft and medium grades
- R10460 : low compression set resistance formula, flame retardant UL94HB medium grade
- R10450 : fiberglasssupported, provides dimensional stability, medium grade
- R10404 : thermally conductive grade for heat and cold transfer
- R10490 : flurosilicone grade for high temperature and solvent resistance
- R10400 : new flame retardant UL 94V0 medium grade and FDA


Strip-N-Stick® pressure-sensitive adhesive tape roll format
- 100S : general purpose closed cell sponge with silicone pressure-sensitive adhesive in thicknesses from 1/16’ to ¼” (1.59 mm -6.35mm)
- 200A : purpose closed cell sponge with acrylic pressure-sensitive adhesive in thicknesses from 1/16’ to ¼” (1.59 mm -6.35mm)
- 300AR : fiberglass-supported closed cell sponge with aggressive acrylic pressure-sensitive adhesive in thicknesses from 1/16” to 3/16” (1.59mm to 3.18mm)
- 440S : soft conformable solid silicone rubber, Shore A 30 durometer with high temperature silicone pressure-sensitive adhesive; offered in 1 thickness —1/32” (0.79mm)
- 440A : soft conformable solid silicone rubber Shore A 30 durometer with aggressive acrylic pressure-sensitive adhesive; offered in 1 thickness — 1/32” (0.79mm)
- 512AF : soft conformable flame retardant silicone foam backing with film- supported aggressive acrylic pressure-sensitive adhesive in thicknesses from 1/16” to ½” (1.59mm to 12.7mm)